Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- The Boeing 767 Cross Section, Part 1 November 24, 2022
- Movie Review: Devotion November 21, 2022
- China will accelerate development of its commercial aerospace sector November 21, 2022
- Bjorn’s Corner: Sustainable Air Transport. Part 46. eVTOL comparison with helicopter November 18, 2022
- The economics of a 787-9 and A330-900 at eight or nine abreast November 16, 2022
Pontifications: Supply chain melt down to get worse, says manufacturer
By Scott Hamilton
Sept. 3, 2018, © Leeham News: There is more evidence the aerospace supply chain is in meltdown—and it’s going to get worse, a manufacturer tells LNC.
The OEM requested anonymity to speak frankly.
As aerospace analysts gather this week in Seattle for their annual investors day at Boeing, based on the research notes I see, there’s little indication they recognize the magnitude of the evolving problems with the supply chain.
Although the focus recently has been on Boeing and analysts will visit Boeing Wednesday, the issues affect all the OEMs.
I wrote about this 30 days ago. Since then, another Boeing supplier last month acknowledged late deliveries of key parts, reports the Puget Sound Business Journal.
This was followed by a Bloomberg report that Lufthansa Airlines continues to have shortages from Pratt & Whitney for the GTF engines powering the A320neo.
Since then, I’ve had my own additional conversations with the supply chain. The production ramp ups that already have been announced and those being contemplated are in peril and all manufacturers are being affected.
Additive manufacturing: Huge potential, big barriers
Subscription Required
Introduction
Part 1 appears here.
By Dan Catchpole
August 27, 2018, © Leeham News: For all its potential, additive manufacturing faces significant hurdles before it can deliver on advocates’ assertions that the technology will revolutionize the aerospace industry.
United Technologies is counting on additive manufacturing, often called 3D printing, to help it develop and produce new components faster, better and cheaper. Paula Hay is leading the expansion of additive manufacturing at United Technologies Aerospace Systems (UTAS). In part two to last week’s interview with Hay, LNC talks to her about what problems have to be solved for additive manufacturing (AM) to make good on its potential.
Summary
- Need more consistent materials and equipment.
- OEMs and regulators have to develop AM standards.
- Design culture has to evolve to reflect AM capabilities.
Pontifications: Supply chain meltdown
By Scott Hamilton
Aug. 6, 2018 © Leeham News: It happened to Airbus. It sort of happened to Boeing. It was bound to happen in a much bigger way to Boeing, and it has.
Some 40 737s are now sitting around the Renton assembly plant in a major supply-chain meltdown.
This follows the highly publicized, two-year long supplier meltdown at Airbus as Pratt & Whitney and CFM fell down on engine deliveries and technical problems for their GTF and LEAP-1A engines, respectively.
Airbus posts strong earnings; ‘hell of a ride’ ahead, says CEO
By Dan Catchpole
J
uly 26, 2018, © Leeham News: Airbus posted strong earnings for the year’s second quarter, thanks to better profitability on its A350 and A320 programs. Investors rewarded the news by pushing Airbus share prices to a 52-week high Thursday morning.
However, Airbus lowered its earnings for the full year due to its takeover of Bombardier’s troubled C Series program, since renamed the A220. Airbus plans to deliver 18 of the single-aisle jetliners this year.
Farnborough: A320 engine suppliers roughly on recovery plan
July 19, 2018, © Leeham News, Farnborough: The engine suppliers for the Airbus A320 family are roughly keeping to their 
recovery plan designed to catch up late deliveries and fix technical problems, a top official said this week.
Guillaume Faury, is the new president and CEO of the Airbus Commercial unit in Airbus Group.
“We look at short-term, medium- and long-term. Short-term, we had an H1 (first half) that was OK for all programs, but the single-aisle was a difficulty with all the engines. We will have a very strong H2 and this is obviously very high on my agenda.
Farnborough: United Technologies goes digital
By Bjorn Fehrm
July 18, 2018, © Leeham News.: United Technologies (UTC) Chairman and CEO Greg Hays said in a Farnborough presentation: “UTC’s focus is a digital lifecycle for all its products.”
“We need to get a digital uninterrupted chain from the idea over development to production and then for the after-sales service. This is the only way we can achieve the increases in development and production efficiency expected of us going forward,” said Hays.
What are the prospects for the Airbus A220?
By Bjorn Fehrm
July 11, 2018, © Leeham News.: With the CSeries repainted and rebranded in Airbus colors, will this change its fortunes? The aircraft has been on the market for 10 years and has not been a home run in term of sales.
We look at how the A220 fits in the Airbus lineup and the sales plan the Airbus leaders say they have for the aircraft.
JetBlue orders 60 A220-300s in surprise timing
July 10, 2018, (c) Leeham News: JetBlue announced an order today for 60 Airbus A220-300s, nee Bombardier CS300s. The airline took options on 60 more.
The timing is a surprise–JetBlue previously said it would not be ready to order until toward the end of the year.
The order is a blow to Embraer, which has 60 E-190s in service with JBLU. The airline had orders for 20 more, but delivery had been deferred several times. Industry insiders told LNC the order could be canceled with little or no penalty.
The order is a blow to Embraer for the flip and for the loss of a potential E2 order. The E195-E2 seats slightly fewer passengers and has less range than the A220-300.
JetBlue has a large fleet of Airbus A320ceos, a few A321ceos and a large order book for neos.
MRJ’s GTF flameout traced to manufacturing issue
Editor’s note: The Farnborough Air Show begins next week. Mitsubishi is expected to have a flying display of the MRJ90 at an international air show for the first time. This is the last of three stories from Mitsubishi’s MRJ program update in Moses Lake (WA) last month.
By Dan Catchpole
July 10, 2018, © Leeham News: An engine flameout in August 2017 that left the Mitsubishi Regional Jet (MRJ) test fleet grounded for several weeks was caused by a manufacturing quality issue on a component in the Pratt & Whitney geared turbofan’s accessory gearbox, according to a Mitsubishi executive.
Source: Mitsubishi.
Related Stories
- MRJ delays over, execs insist (now open to all readers).
- Laser focus for MRJ program (now open to all readers).
MRJ program chief Alex Bellamy said the manufacturing quality problem caused a machined component to suffer a durability issue, leading to flameout.
Laser focus for MRJ program
Subscription Required
By Dan Catchpole
July 3, 2018, © Leeham News: It’s been two years since a small army of Japanese aerospace workers landed in Moses Lake, a sleepy former Air Force base town in rural Central Washington. The Mitsubishi Aircraft Corp. (MAC) will be in Moses Lake for another four or five years as it nudges its new regional jets—the MRJ70 and MRJ90—into service.
Japan’s All Nippon Airways is the launch customer and first operator for the Mitsubishi MRJ90. Source: Mitsubishi.
The first Mitsubishi Regional Jet, the MRJ90, originally was supposed to enter into service in 2013, but myriad develop delays have dogged the sleek jet, which now is slated to deliver to launch customer All Nippon Airways in mid-2020.