Leeham News and Analysis
There's more to real news than a news release.
Leeham News and Analysis
- The Boeing 767 Cross Section, Part 1 November 24, 2022
- Movie Review: Devotion November 21, 2022
- China will accelerate development of its commercial aerospace sector November 21, 2022
- Bjorn’s Corner: Sustainable Air Transport. Part 46. eVTOL comparison with helicopter November 18, 2022
- The economics of a 787-9 and A330-900 at eight or nine abreast November 16, 2022
Pontifications: Mitsubishi ramping up flight testing for MRJ
By Scott Hamilton
Aug. 15, 2016, © Leeham Co.: Mitsubishi Aircraft Corp. (MAC) is about to dramatically ramp up its flight testing of the MRJ-90.
Media has been alerted to an all-day event next month, complete with a tour of the Moses Lake (WA) facility, where test airplanes will be based.
The program is two years behind schedule for the brand new design, the first commercial airliner produced by Japan since the YS-11 turboprop more than 50 years ago.
Pontifications: Twelve new designs in 10 years spurred orders
By Scott Hamilton
Aug. 8, 2016, © Leeham Co.: The book:bill for Airbus and Boeing this year will be hard-pressed to reach one. Airbus has a better shot, given lower production rates. But the recent years of record-setting orders are over for now.
Unlike some, this doesn’t represent a bursting bubble to LNC. Rather, it’s a natural progression of the cycles that are historically seen.
It’s necessary to put some context into the recent years of these unprecedented number of orders.
Interview with Rob Dewar: CSeries in service reliability
By Bjorn Fehrm
Subscription required
Introduction
21July 2016, ©. Leeham Co: Bombardier”s CSeries project has passed one hurdle after another during its development. The last one was the lack of Marquee customers on top of launch customer SWISS. This has now been solved with large orders from Air Canada and Delta Air Lines.
There is one hurdle remaining: what will be the aircraft’s reliability when it enters into service (EIS)?. We did the EIS interview with CSeries VP and program manager Rob Dewar only two days before the CS100 aircraft would fly its first operational sectors with Swiss last Friday. This autumn, airBaltic will put the larger CS300 into service.
Figure 1. Bombardier’s program manager for the CSeries, Rob Dewar. Source: Bombardier
Summary
- The CSeries has been designed for in service reliability from the outset of the project.
- Systems and solutions have been primarily chosen for the in-service maturity on other platforms.
- Any deviation from this philosophy, like for Fly-By-Wire, Geared Turbo Fan or Electrical brakes, requires that the technology earn its place in the project by bringing unique advantages.
Bjorn’s corner: Farnborough week
By Bjorn Fehrm
July 15, 2016, ©. Leeham Co, Farnborough Air Show: We have been at Farnborough Air Show this week, the highlight of the year for an aircraft geek like me. This year there were several interesting aircraft that visited the show for the first time.
Embraer brought over the brand new first prototype of the E-jet 190-E2 and the prototype of their military transporter, the KC-390. Bombardier had their first customer/production CS100 from Swiss to visit the show in addition to their Flight Test Vehicle (FTV) no 5. And Lockheed Martin had the F35B, the vertical landing version, come and hover over the airfield the days that were reasonably rain free in the afternoon.
One thing is clear with the new generation of Single Aisle aircraft: their high bypass engines dominate the visual appearance. Figure 1 shows the 73 inch version of the Pratt & Whitney GTF on the E190-E2 prototype. Huge diameter engine on a not so huge diameter aircraft.
Figure 1. The prototype E190-E2 with its Pratt & Whitney GTF engine on the Farnborough apron. LNC photo.
Pontifications: New war of words erupts
By Scott Hamilton
July 11, 2016, © Leeham Co., Farnborough Air Show: The war of words between Airbus and Boeing is legendary, and it continued unabated today, the first day of the Farnborough Air Show.
- See my column in Forbes for a rundown of the first day’s orders at the Farnborough Air Show.
Boeing continue its refrain during its press briefing that its airplanes are better than Airbus. Airbus returned fire moments later in its own press conference that followed Boeing’s.
But the more interesting war that is emerging is between Embraer and Bombardier.
Bombardier sees more C Series orders this year
Our coverage of the Farnborough Air Show begins today with an interview with Fred Comer, president of Bombardier Commercial Aircraft. There will be paywall and freewall posts throughout the FIA16 this week.
Subscription Required
Introduction
July 10, 2016, © Leeham Co., Farnborough Air Show: Winning major orders from Air
Fred Comer, president of Bombardier Commercial Aircraft.
Canada and Delta Air Lines earlier this year and the entry into service of the CS100 this Friday with launch customer Swiss International Air should give Bombardier’s bet-the-company gamble a boost for more orders this year.
This is the prediction by Fred Comer, president of Bombardier Commercial Aircraft.
During an interview with LNC on a media demo flight of the CS100 at the Farnborough Air Show, Comer said the smaller BBD can compete with the behemoths Airbus and Boeing for orders in the 125-150 seat sector.
Summary
Comer says:
- Boeing’s prospective 737-7.5 still won’t be competitive.
- The CS100 is better than the Embraer EJet-E2.
- Embraer’s complaints of unfair competition because of Canadian government investment are unfounded.
Read more
Bombardier’s CS100 media flight demonstrates quiet
July 10, 2016, (c) Leeham Co.: Our coverage of the Farnborough Air Show (#FIA16 on Twitter) begins today, with a media flight on the Bombardier CS100. The day was rainy and somewhat turbulent until the flight got above the clouds. Some videos are jumpy as a result.
There are several videos about the flight and some with interviews following the page break.
Quiet taxi
The first video is intended to demonstrate the quiet Pratt & Whitney engines during taxi.
Pontifications: Airbus CXLs A320, A350 August vacations
By Scott Hamilton
June 20, 2016, © Leeham Co.: Airbus officials canceled the annual August vacations in Europe for the A320 and A350 production lines.
The A320neo and A350-900 are backing up on the delivery lines because of supplier issues with the Pratt & Whitney GTF for the former and galley and lav issues from Zodiac for the latter.
Qatar Airways Airbus A320neo awaiting new-production Pratt & Whitney GTF engines with fixes incorporated. Photo via Google images.
The delays and issues are well documented in the press and for aerospace analysts.
“I cannot confirm that rumor for you,” an Airbus spokesman wrote LNC in an email. “I can tell you that we are putting in place extra resources to deliver on our 2016 commitments and objectives in terms of deliveries, but we are not going into detail on what that looks like at this stage.”
Wells Fargo sees reasonable, risky production rates
June 7, 2016: Single-aisle production rates of 57/mo at Boeing and 60/mo at Airbus are
reasonable when achieved in the near term but more problematic in 2019. Wide-body production rate hikes are risky.
This is the conclusion of a short research note issued June 1 by Wells Fargo Securities.
“Higher Rates Sustainable,” WFS writes. “Aircraft deliveries have historically been cyclical, yet Boeing and Airbus have had flat-to-rising deliveries for 12 years–and both forecast higher near-term deliveries. The bottom line is that the OEMs’ forecasts can be reasonable in our view, assuming aircraft retirement levels and/or traffic growth are above historical rates. Therefore, we expect higher deliveries over the next several years, but think it is unlikely that the full 35-40% A320/737 production increase currently envisioned by the OEMs will be achieved by 2020.”
UTC media day 1: UTAS, twice the size of any other aerospace systems company
Note: United Technologies Corp (UTC) is holding its annual Media Days today and tomorrow. We’re providing reporting from the event. This is the first time in our long participation that UTC Aerospace Systems is presenting. UTAS is a major supplier and service provider to all the airframe OEMs.
June 6, 2016: UTC Aerospace Systems is just four years old, following mergers with
Dave Gitlin, CEO of UTC Aerospace Systems (UTAS).
Hamilton Sundstrand and Goodrich–the largest in aerospace history, says Dave Gitlin, president of UTC Aerospace Systems.
UTAS provides electrical power and bleed air systems, engine, starters, power systems, all the circulating fans on the Boeing 787, monitoring systems and much more. Evacuation slides, the Ram Air Turbines, landing gear, flaps and slat control systems, brakes and thrust reversers.